Tip #1) Antipad and thermal clearances Antipads should be 0.010 to 0.020″ larger than outer layer pads. For thermal pads, the moat should be a minimum of 0.012 ( favored 0.015) and pads should be equal to or larger than outer layer pads. Clearances for solder masks around non pl

Before sending your PCB design to have printed into prototypes, production and then assembled, there are a few ways to help keep your PCB assembly costs down. At OnBoard Circuits, our goal is to produce high quality printed circuit boards at the lowest cost to you. Below are 8 PCB des